smf5v0a-m to smf51a-m www.vishay.com vishay semiconductors rev. 1.1, 30-nov-11 1 document number: 83355 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount esd protection diodes marking (example only) bar = cathode marking yy = type code (see table below) xx = date code features ? for surface mounted applications ? low-profile package ? optimized for lan protection applications ? ideal for esd protection of data lines in accordance with iec 61000-4-2 (iec 801-2) ? ideal for eft protection of data lines in accordance with iec 61000-4-4 (iec 801-4) ? esd-protection acc. iec 61000-4-2 30 kv contact discharge 30 kv air discharge ? low incremental surge resistance, excellent clamping capability ? 200 w peak pulse power capability with a 10/1000 s waveform, repetition ra te (duty cycle): 0.01 % ? very fast response time ? high temperature soldering guaranteed: 260 c/10 s at terminals ?e3 - sn ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec ? halogen-free according to iec 61249-2-21 definiton ordering information 17249 20278 1 2 yy 22623 xx package data device name package name type code weight molding compound flammability rating moisture sensitivity level soldering conditions smf5v0a-m smf ne 15 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals smf6v5a-m nk smf7v0a-m nm smf7v5a-m np smf8v0a-m nr smf8v5a-m nt smf9v0a-m nv smf10a-m nx smf11a-m nz smf12a-m oe smf13a-m og smf14a-m ok smf15a-m om smf16a-m op smf17a-m or smf18a-m ot smf20a-m ov smf22a-m ox smf24a-m oz smf5v0a-m-xx 08 = 3k per 7" reel (8 mm tape), 30k/box 18 = 10k per 13" reel (8 mm tape), 50k/box environmental suffix -m- defines halogen-free part number
smf5v0a-m to smf51a-m www.vishay.com vishay semiconductors rev. 1.1, 30-nov-11 2 document number: 83355 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 smf26a-m smf pe 15 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals smf28a-m pg smf30a-m pk smf33a-m pm smf36a-m pp smf40a-m pr smf43a-m pt smf45a-m pv smf48a-m px smf51a-m pz package data device name package name type code weight molding compound flammability rating moisture sensitivity level soldering conditions absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test conditions symbol value unit peak pulse current t p = 10/1000 s waveform acc. iec 61000-4-5 i ppm see electrical characteristics a peak pulse power t p = 8/20 s waveform acc. iec 61000-4-5 p pp 1000 w t p = 10/1000 s waveform acc. iec 61000-4-5 200 w peak forward surge current 8.3 ms single half sine-wave i fsm 20 a esd immunity contact discharge acc. iec 61000-4-2; 10 pulses v esd 30 kv air discharge acc. iec 61000-4-2; 10 pulses 30 kv thermal resistance mounted on epoxy glass pcb with 3 mm x 3 mm, cu pads ( ?? 40 m thick) r thja 180 k/w forward clamping voltage i f = 12 a v f 3.5 v operating temperature junction temperature t j - 55 to + 150 c storage temperature t stg - 55 to + 150 c electrical characteristics (t amb = 25 c, unless otherwise specified) part number reverse breakdown voltage at i t , t p ? 5 ms test current reverse working voltage reverse current at v rwm maximum peak pulse current t p = 10/1000 s reverse clamping voltage at i ppm capacitance at v r = 0 v, f = 1 mhz protection paths v br min. (v) i t (ma) v rwm (v) i r (a) i ppm (a) v c (v) c d typ. (pf) n channel smf5v0a-m 6.40 10 5 400 21.7 9.2 1030 1 smf6v0a-m 6.67 10 6 400 19.4 10.3 1010 1 smf6v5a-m 7.22 10 6.5 250 17.9 11.2 850 1 smf7v0a-m 7.78 10 7 100 16.7 12 750 1 smf7v5a-m 8.33 1 7.5 50 15.5 12.9 730 1 smf8v0a-m 8.89 1 8 25 14.7 13.6 670 1 smf8v5a-m 9.44 1 8.5 10 13.9 14.4 660 1 smf9v0a-m 10 1 9 5 13.5 15.4 620 1 smf10a-m 11.1 1 10 2.5 11.8 17 570 1 smf11a-m 12.2 1 11 2.5 11 18.2 460 1 smf12a-m 13.3 1 12 2.5 10.1 19.9 440 1 smf13a-m 14.4 1 13 1 9.3 21.5 420 1 smf14a-m 15.6 1 14 1 8.6 23.2 370 1 smf15a-m 16.7 1 15 1 8.2 24.4 350 1 smf16a-m 17.8 1 16 1 7.7 26 340 1 smf17a-m 18.9 1 17 1 7.2 27.6 310 1 smf18a-m 20 1 18 1 5.8 29.2 305 1
smf5v0a-m to smf51a-m www.vishay.com vishay semiconductors rev. 1.1, 30-nov-11 3 document number: 83355 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - peak pulse power rating fig. 2 - pulse derating curve fig. 3 - pulse waveform smf20a-m 22.2 1 20 1 6.2 32.4 207 1 smf22a-m 24.4 1 22 1 5.6 35.5 265 1 smf24a-m 26.7 1 24 1 5.1 38.9 240 1 smf26a-m 28.9 1 26 1 4.8 42.1 225 1 smf28a-m 31.1 1 28 1 4.4 45.4 210 1 smf30a-m 33.3 1 30 1 4.1 48.4 205 1 smf33a-m 36.7 1 33 1 3.8 53.3 190 1 smf36a-m 40 1 36 1 3.4 58.1 180 1 smf40a-m 44.4 1 40 1 3.1 64.5 165 1 smf43a-m 47.8 1 43 1 2.9 69.4 160 1 smf45a-m 50 1 45 1 2.8 72.7 155 1 smf48a-m 53.3 1 48 1 2.6 77.4 150 1 smf51a-m 56.7 1 51 1 2.4 82.4 145 1 electrical characteristics (t amb = 25 c, unless otherwise specified) part number reverse breakdown voltage at i t , t p ? 5 ms test current reverse working voltage reverse current at v rwm maximum peak pulse current t p = 10/1000 s reverse clamping voltage at i ppm capacitance at v r = 0 v, f = 1 mhz protection paths v br min. (v) i t (ma) v rwm (v) i r (a) i ppm (a) v c (v) c d typ. (pf) n channel p pp - peak pulse power (kw) 0.1 1 10 0.1 s 1.0 s 10 s t d - pulse width (s) 100 s 1.0 ms 10 ms non-repetitive pulse waveform shown in fig. 3 t a = 25 c 17250 0 25 50 75 100 0 75 25 50 100 125 150 175 200 peak pulse power (p pp ) or current (i ppm ) derating in percentage (%) t a - ambient temperature 17251 0 50 100 150 i ppm - peak pulse current, % i rsm t j = 25 c pulse width (t d ) is defined as the point where the peak current decays to 50 % of i ppm peak value i ppm half value i ppm t d 10/100 s waveform as defined by r.e.a. 0 1 2 3 4 t - time (ms) 17252 t r =10 s i ppm 2
smf5v0a-m to smf51a-m www.vishay.com vishay semiconductors rev. 1.1, 30-nov-11 4 document number: 83355 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): smf foot print re commendation: rev. 3 - date: 13. march 2007 document no.:s8-v-3915.01-001 (4) 1.3 (0.051) 1.3 (0.051) 2.9 (0.114) 1.4 (0.055) 2.9 (0.114) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) 0.85 (0.033) 0.35 (0.014) 1.2 (0.047) 0.8 (0.031) 1.9 (0.075) 1.7 (0.067) 1.08 (0.043) 0.88 (0.035) 0.25 (0.010) 0.05 (0.002) 0.1 (0.004) 0 (0.000) 5 5 created - date: 15. february 2005 17247 detail z enlarged
smf5v0a-m to smf51a-m www.vishay.com vishay semiconductors rev. 1.1, 30-nov-11 5 document number: 83355 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 blistertape dimensions in millimeters (inches) 18513 ps document-no.: s8-v-3717.02-001 (3)
smf5v0a-m to smf51a-m www.vishay.com vishay semiconductors rev. 1.1, 30-nov-11 6 document number: 83355 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 pin 1 - location top view pad layout - view from top s een at bottom s ide llp1713 llp2513 llp3313 pin 1 - location pin 1 - location top view top view pad layout - view from top s een at bottom s ide pad layout - view from top s een at bottom s ide
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
